Always with you ............ Enlightening your family
OTHER PRODUCTS

: : Electronic Choke : :

The MOS ELECTRONIC CHOKE for fluorescent lamps is the result of recent development of modern technology in the field of electrical lighting. The conventional ballast commonly used have losses to the amount of 15W to 18W in a typical 40W tube resulting in nearly 40% excess power consumption. The new Electronic Chokes besides overcoming the above said problems in conventional Chokes have distinct advantages over them.

FEATURES:

Characteristics

MOS Energy Saver

Conventional Choke

Power consumption of the total Fixture

36 W

55 to 60W

Operating Voltage range

120V to 265V

190 to 250V

Noise level

Nil

Audible

Starting

Instantaneous

Delayed

Luminosity

66 Lumens/Watt

47 Lumens/Watt

Life of the tube

8920 hrs

5000 hrs

Temperature rise

Negligible

10 to 15 above room Temperature

Power factor

above .9

.55 to .6

ADVANTAGES:

  • It saves 40% of the energy cost
  • It saves 35% to 40% in the Input power
  • Increases the lighting efficiency of the system (Foot candle/Watt) by 14%   approximately
  • Operates efficiently in very wide voltage Fluctuations (i.e., 120V to 260V) without unduly affecting Tube life and performance
  • Gives higher power factor of 0.9 and above
  • Is the Durable as the conventional Ballast
  • No need of starters and capacitors which are used in conventional Ballasts
  • Almost doubles the life of the tube
  • Built in instant start/rapid start systems helps to avoid starting transients
  • Gives stabilized light output and no stroboscopic effect or Flickering, good for eyes
  • The Temperature rise is being very little resulting in lower heat dissipation
  • No humming noises, Operates very silently
  • Has lesser maintenance requirements and reduced inventory
  • Can operate more efficiently with diesel generator sets.

 : : Battery Charger : :

MOS manufacturing technology in Electronic manual (current) controlled chargers are a milestone in Aviation, Marine and Industrial Charging field. Ranges are available from 1 Amps to 50 Amps. MOS innovative product design and total quality control system contribute to meet the most stringent demands of its privileged customers.

AUTOMATIC BATTERY CHARGER
Technical Specifications
Full load current 3 - 5 Amps
Max. No. of Batteries 6V x 2 or 12V x 1
Protection Reverse, overcharge , over discharge
For Charging Automotive & M.C. Batteries
Functions Automatic full charge cut-off with reset

FEATURES

  • Charge any re-chargeable battery within a limited period.
  • Automatic battery overcharge, overdischarge protection.
  • Continuous connecting facility.
  • Charge level indications with Ammeter.
  • Battery reverse protection with indication.
  • Ideal for Car, Jeep, Vans, Generator Applications.
  • Warranty - All Battery Charger with one year warranty and life long AMC.

INDUSTRIAL BATTERY CHARGER
Technical Specifications
Full load current 20  Amps
Max. No. of Batteries 12V x 6 or 6V x 12
Protection Fuse on AC, MCB on DC
Indication Input Charger on charging current (A) charging volt (V)

FEATURES
  • Hi-tech design for longer life.
  • Charge any re-chargeable battery within a limited period.
  • Over current protection.
  • Output miniature circuit breakers.
  • High loading capacity.
  • Charge level voltmeter & Ammeter.
  • Rotary controlled current and volt selections.
  • Available 1Amp to 20 Amps.
  • Warranty - All Battery Charger with one year warranty and life long AMC.


 

 

 

 

 

 

 

 

Copyright © 2007 MOS™ Systems & Controls.
.:: Powered by NiLASOFT ::.